Aradhya Fire Protection

• The System Sensor DNR Duct Smoke Detector utilizes photoelectric technology for the detection of smoke. This detection method is combine with an efficient housing design, samples air through the duct that allows detection of a developing hazardous condition.

• Morley Passive Repeater. This is an indication only repeater. The back lit LCD and the common system status LED’s follow the indication on the main fire alarm panel. Furthermore the passive repeater has configuration and test functions such as Lamp Test, LCD Test, and Buzzer Test. 24 Vdc supply required. 165 x 254 x 50mm (H x W x D).

NOTIFIER’s intelligent addressable control module provides supervised monitoring of wiring to load devices that require an external power supply to operate, such as horns, strobes, or bells. It is capable of Class A and Class B supervision. The relay module allows the control panel to switch two isolated sets of Form C contacts on command without supervision for the notification appliance circuit.

Features:

• SEMS screws for easing wiring
• Panel controlled status LED
• Analog communications
• Rotary address switches
• Low standby current
• Mounts in standard 4?? junction box

Additional Information:

• Production Capacity: Maximum
• Delivery Time: Ready Stock

General The NFS2-3030 is an intelligent Fire Alarm Control Panel (FACP) designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the NFS2-3030 is ideally suited for these applications. The NFS2-3030 is part of the ONYX® Series of products from NOTIFIER. The NFS2- 3030 is ideal for virtually any application because it features a modular design that is configured per project requirements. With one to ten Signaling Line Circuits (SLCs), the NFS2-3030 supports up to 3,180 intelligent addressable devices. Information is critical to fire evacuation personnel, and the NFS2- 3030’s large 640-character Liquid Crystal Display (LCD) presents vital information to operators concerning a fire situation, fire progression, and evacuation details. A host of other options are available, including single- or multi-channel voice; firefighter’s telephone; LED, LCD, or PC-based graphic annunciators; networking; advanced detection products for challenging environments; wireless fire protection; and many additional options. 

Features:

• Certified for seismic applications when used with the appropriate seismic mounting kit. 
• Approved for Marine applications when a marine-listed version is used with marine-listed compatible equipment. See DN-60688. 
• Complies with UL 2572 Mass Notification Systems (NFS2-3030 version 20 or higher). 
• One to ten isolated intelligent Signaling Line Circuits (SLC) Class A, B, or X. 
• Wireless fire protection using SWIFT Smart Wireless Integrated Fire Technology. See DN-60820. 
• Up to 159 detectors and 159 modules per SLC; 318 devices per loop/3,180 per FACP or network node.
• Detectors can be any mix of ion, photo, thermal, or multi-sensor; wireless detectors are available for use with the FWSG. 
• Modules include addressable pull stations, normally open contact devices, two-wire smoke detectors, notification, or relay; wireless modules are available for use with the FWSG. 
• Large 16 line, 640 character LCD backlit display or use displayless as a network node. 

Network options: 

• High-speed network for up to 200 nodes (NFS2-3030, NFS2- 640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYXWorks, NFS-3030, NFS-640, and NCA). 
• Standard network for up to 103 nodes (NFS2-3030, NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM, ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP300/400, AFP-1010, and AM2020). Up to 54 nodes when DVCEM is used in network paging. 
• Built-in Alarm, Trouble, Security, and Supervisory relays. 
• VeriFire® Tools online/offline program option. 
• With built-in Degraded Mode operation, the system is capable of general alarm if a fire alarm condition is present even if the central processing unit (CPU) fails. 
• Weekly Occupancy Schedules allow changing sensitivity by time of day and day of week. 
• EIA-485 annunciators, including custom graphics.

Additional Information:

• Packaging Details: BOX

Additional Information:

• Item Code: 9954661
• Delivery Time: 2 days

Additional Information:

• Production Capacity: ready stock
• Delivery Time: in stock

• Item Code: 9954661
• Delivery Time: 2 Days

• Two Loop Control Panel, 230Vac, 2 sounder circuits. Dims 391.5 x 390 x 147mm (H x W x D) The DX Connexion is an enhancement of the Morley-IAS Dimension panel range, connecting the traditional Morley-IAS qualities of reliability, flexibility and value with advanced features and intuitive functionality.

• The Notifier NBG-12LX is a state-of-the-art, dual-action (i.e.,requires two motions to activate the station) pull station thatincludes an addressable interface for any Notifier intelligentcontrol panel except FireWarden series panels.

Notifier FSP-851AUS Series intelligent plug-in smoke detectors with integral communication provide features that surpass conventional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector's address to be set with decade address switches, providing exact detector location for selective maintenance when chamber contamination reaches an unacceptable level. The FSP-851 photoelectric detector's unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. FSP-851 detectors are compatible with all Notifier intelligent Fire Alarm Control Panels (FACP).

NOTIFIER''''s offers a variety of intelligent monitor modules for diverse applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors. Monitor modules model numbers include the FMM-1, FMM-101, FZM-1 and FDM-1.
Features & Benefits:  

Built-in type identification automatically identifies this device as a monitor module to the control panel

SEMS screws with clamping plates for ease of wiring

Direct-dial entry of address: 01 – 159

LED indication for normal or off normal indication

FMM-1 Monitor Module

Class A supervised wiring to the monitored device

FMM-101 Mini Monitor Module

Class B supervised wiring to the monitored device

Smaller size fits inside devices or junction boxes

FZM-1 Zone Interface Monitor Module

Transmits the status of one zone of 2-wire detectors to the fire alarm control panel

Status conditions are reported as normal, open, or alarm

FDM-1 Dual Monitor Module

Monitors two separate Class B circuits

Additional Information:

• Production Capacity: Maximum
• Delivery Time: Ready Stock

• HM-PTSE-AP, HM-PTSE-I-AP Photoelectric Smoke / Thermal Multi-Criteria Fire Detectors The multi-criteria Photo Thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires.

• Availabe with or without short circuit isolation
• isolator per device allows faster, more precise fault finding 
• Rotary decade address switches
• Ivory colour to harmonise with the modern built environment
• • Worldwide proved reliability
  • Easy to maintain (washable filter)
  • Enhanced smoke chamber design to reduce false alarms by dust or contamination
  • Fast installation with rotatory addressable switches (01-99)
  • 2 state LED for 360º indication
  • Aesthetic design to harmonise with the modern built environment
  • Base complements the detector and is easy to install and wire
  • Genuine and fast response
  • Advanced protocol and smoothing filter to suppress false alarm
  • Analog addressable communication
  • Dual integrated LED for 360° visibility
  • Conforms to EN54-7
  • LPCB approved
  • Environment friendly
  - meets RoHS legislative requirements

NOTIFIER’s intelligent addressable isolator module, the ISO-X is used with Fire Alarm Control Panels to protect the system against wire-to-wire short circuits on the Signaling Line Circuit loops. The ISO-6 is a six fault isolator module providing isolation on six equivalent circuits.

Features & Benefits:

• Enables part of the communications loop to operate when a short circuit occurs
• Automatically resets on correction of short
• ISO-X
  • SEMS screws with clamping plates for ease of wiring
• ISO-6
  • Removable 12 to 18 AWG plug-in terminal blocks
  • Six individual, Class B isolator circuits
  • Specifications
    • Normal Operating Voltage: 15-32 VDC
    • Stand-By Current: 450μA (not isolating) per circuit
    • Maximum Current Draw: 17mA (device in isolation)
    • Temperature Range: 32°F to 120°F (0°C to 49°C)

Additional Information:

• Production Capacity: Maximum
• Delivery Time: Ready Stock