Aradhya Fire Protection

The TrueAlarm sounder base has a builtin piezoelectric sounder that provides a high 90 dBA output whilst maintaining a low current requirement. Used with the interchangeable TrueAlarm detectors, the sounder can be powered from 24Vdc or from a compatible Notification Appliance Circuit (NAC). It is synchronised coded/ temporal coded by the CIE. or by the NAC. The sounder can be manually activated from the CIE. and sounder operation can operate independently to detector operation The sounder base has a built-in magnetic test feature.

We are engaged in offering a wide range of 4098-9793EA TrueAlarm IDNet Isolator Base to our clients. Our range of all products is widely appreciated by our clients.

The 4099-9006 Simplex addressable manual cal point combines the familiar Simplex Manual Station housing with a compact communication module that is easily installed to satisfy demanding applications.

TrueAlarm photoelectric smoke detectors use a stable pulsed LED light source and a silicon photodiode receiver to provide consistent and accurate low power smoke sensing. Seven CIE. selected sensitivity levels are available for each detector. Used in conjunction with the Simplex 4100ES/4100U series of CIE, the 4098-9714EA has a high degree of nuisance alarm immunity thanks to advanced algorithms

The addressable SIMPLEX 4010ES fire alarm control unit offers our most advanced technology in a package that’s the right size and cost for a small or mid-sized facility.

4100ES addressable fire alarm control units support up to 3,000 points, voice communication, suppression release control, IP based networking, a touch screen interface, and self-testing notification appliances. With scalable architecture and future-proof design, 4100ES control units are ideal for medium to large facilities and multi-building campus style networks.

We are engaged in offering a wide range of 4098-9714EA TrueAlarm Photoelectric Smoke Detector to our clients. Our range of all products is widely appreciated by our clients.

The TrueAlarm Multi-Sensor detector base features two sequentially addressed points, automatically assigned with one address selection. The base-mounted address selection allows the address to remain with its programmed location when the detector is removed for service. An integral red LED indicates poweron by pulsing, or alarm or fault when steady on, reflecting status of either sensor. The exact status of the specific sensing element is annunciated at the CIE. The 4098- 9796EA must be used when adding a 4098-9754 multi-sensor to the MAPNET II protoco

This multi-sensor detector combines the TrueAlarm photoelectric smoke sensor with a fast-acting, accurate TrueAlarm thermal sensor in a single detector/base assembly. Each multi-sensor’s smoke and heat sensing element provides data for evaluation at the CIE where four independent detection modes are evaluated: • Fixed temperature heat detection • Rate-of-rise heat detection • TrueAlarm photoelectric smoke detection • TrueSense correlation detection The thermal sensor can selectively generate an alarm at a fixed temperature or a rate-of-rise of temperature. Complies with AS 1603.1-1997 and AS 1603.2- 1997 

Small footprint, big protection:  The Simplex 4007ES brings state-of-the-art fire alarm technology to smaller projects.