Aradhya Fire Protection

Models DB-11 and DB-11E are the standard bases for Model ’H’-series “11” and Model “121”-series conventional detectors, as well as the Model ’H’-series addressable detectors. Model DB-11 has a 6-inch (15.2 cm) diameter. The diameter for Model DB-11E is 4.5 inches (11.4 cm).

Model OP121 from Siemens   Fire Safety is a photoelectric smoke detector with microprocessor-controlled, self-diagnostic circuitry, eliminating the need for burdensome sensitivity test equipment. Model OP121 also comes with a new magnet-test feature. The magnet-test feature allows installers and test personnel to prove the integrity of the wiring and proper connection to the fire alarm control panel (FACP). The auto-sensitivity feature for Model OP121 stems from the internal, selfmonitoring circuitry, and provides dynamic verification of sensitivity and / or required maintenance. The auto-sensitivity feature is displayed by Siemens Fire Safety’s unique (3) three-color light-emitting diode (LED), provided locally on the detector   and optionally with the various remote LED indicators

 Function – Direct alarm actuation by pushing in the glass plate – By replacing the glass plate the push button is set back and the device is ready for operation again. l Application – For the immediate manual actuation of an alarm – For indoor and outdoor application – For surface- and recess-mounted feed lines in easily accessible places

The Model TRI-series of intelligent interface modules from Siemens ??? Fire Safety is designed to provide the means of interfacing direct shorting devices to Model MLC for the FireFinder XLS FACP, or to Model ALD for the MXL system, respectively. The Model TRI-series of intelligent interface modules provides the most advanced method of address programming and supervision ??? combined with sophisticated FACP communication. Each Model TRI-series interface module incorporates a microcomputer chip. In turn, the microcomputerchip technology and its sophisticated bi-directional communication capabilities with the 

The Photoelectric Smoke Detector (Model OP921) uses state-of-the-art microcontroller circuitry and surface-mount technology for maximum reliability. Model OP921 incorporates an optical sensor using a light-scattering detection principle. The device utilizes advanced software algorithms to analyze the signals providing highly stable and accurate smoke detection. 

The Photoelectric Smoke Detector (Model OP921) uses state-of-the-art microcontroller circuitry and surface-mount technology for maximum reliability. Model OP921 incorporates an optical sensor using a light-scattering detection principle. The device utilizes advanced software algorithms to analyze the signals providing highly stable and accurate smoke detection.

The HFP-11 utilizes advanced detection technology that allows the detector to distinguish non-threatening deceptive phenomena, such as cigarette smoke, from actual fire hazards, while optimizing detection for the area in which it is installed.

The Siemens ZH-MC-R is a Multi Candela Horn Strobe for wall mounting. — Strobe produces a minimum flash rate of 60 flashes per minute (1 flash per second) — Synchronize using the Siemens DSC sync modules: MPC 6000 / 7000 Panels, or RSE-300 Power Supply with built-in sync protocol — Selectable Continuous Horn or Temporal (Code-3) Tones with 90 or 95 dBA selectable setting (ZH) — Field-selectable Candela settings of 15/30/75/110cd and 135/185cd

The Siemens ZH-MC-R is a Multi Candela Horn Strobe for wall mounting. — Strobe produces a minimum flash rate of 60 flashes per minute (1 flash per second) — Synchronize using the Siemens DSC sync modules: MPC 6000 / 7000 Panels, or RSE-300 Power Supply with built-in sync protocol — Selectable Continuous Horn or Temporal (Code-3) Tones with 90 or 95 dBA selectable setting (ZH) — Field-selectable Candela settings of 15/30/75/110cd and 135/185cd

The Intelligent Fire Detector (Model FP-11) is a highly evolved detection system that provides a very sophisticated level of fire protection, along with superior immunity to nuisance-alarms. Model FP-11 utilizes highly developed detection technology that allows the detector to distinguish non-threatening deceptive phenomena (i.e. − cigarette smoke) from actual fire hazards, while optimizing detection for the area of its intended zone. Model FP-11 uses state-of-the-art microprocessor circuitry with error check; detector self-diagnostics, and supervision programs. Model FP-11 is compatible with the Siemens − Fire Safety Model FPI-32 upgrade kit or Siemens’ field-programmer / tester, Model DPU / FPI-32, which is a compact, portable and menu-driven accessory for efficiently programming and testing detectors electronically

Fire Safety HTRI-R Intelligent interface module is designed to provide the means of interfacing direct shorting devices to the fire-alarm control panel (FACP) loop circuit.

The HTRI-series modules provide the most advanced method of address programming and supervision on the market ??? combined with sophisticated control panel communication. Each HTRI-series interface module incorporates a microcomputer chip, and each interface module achieves the state of an `intelligent device’ through its microcomputer-chip technology, combined with its sophisticated, bi-directional communication capabilities with the FACP.